DBR-300 is a high performance differential beacon receiver combined with
a high-sensitivity antenna in an extremely compact and fully waterproof
enclosure, providing 1 ~ 5 meter differential GPS positioning accuracy
by utilizing radiobeacon signals (with 283.5 ~ 325 Khz DGPS corrections)
broadcast by USCG or IALA beacon stations at no charge. Both Beacon
receiver & antenna are built inside the enclosure, making DBR-300 a single device featuring easy installation, maintenance, and integrated
services.
SIGNAL PROCESSING |
|
| Frequency Range | 283.5 ~ 325.0 Khz |
| Channel Spacing | 500 Hz |
| Frequency Resolution | 100 Hz |
| Minimum Signal Strength | <5 uV/m @ 100bps |
| Dynamic Range | >90 dB |
| Adjacent Channel Rejection | 60 dB @ 1 Khz |
| Acquisition Time |
|
| Selection of Station | Automatic or manual |
| Signal Detection | Direct digital synthesis (DDS) |
DATA PROCESSING |
|
| Demodulation | MSK (Minimum Shift Keying) |
| Error Detection | Parity error check |
| MSK Bit Rates | 50, 100, 200 (manual or automatic) |
DATA PORTS |
|
| Housing | 7 pin circular, hermetically sealed |
| Pins | Gold plated for anti-corrosion |
POWER REQUIREMENTS |
|
| Input Voltage | 12
~ 24 DC with power -reverse protection |
| Power Consumption | Less than 1.6W 12V DC (max) |
ENVIRONMENTAL CONDITIONS |
|
| Operating Temperature | 30º ~ +75ºC |
| Storage Temperature | 40º ~ +85ºC |
| Relative Humidity | 95% non-condensing |
PHYSICAL CHARACTERISTICS |
|
| Dimension | 3.25
inches (height) x 4.4 inches (diameter) |
| Weight | 1.37 lbs |
| Enclosure | High
impact, corrosion-proof, PC (polycarbonate) resin |
| Construction | Hermetically sealed, fully weather proof |
| Mounting | Pole mount to 1" - 14 threaded pipe |
(This specification is subject to change without prior notice.)
Data Updated: August 24, 2005| 1995- © San Jose Navigation, Inc. All rights reserved. |