GPS Engine Board (GPS Module)
T-type design for embedding in portable devices and receiver
MODEL: TK-1315TA
Overview
Trend of the development of GPS applications has emerged from mono-function machine of fancy price to a must-have feature of reasonable low price for many consumer's or commercial devices.
Features
- Assembled in the form of T-type
- 20 parallel channels
- -160 dBm high GPS sensitivity 14-pin stamp holes
Applications:
- Personal Navigation Device including GPS PDA and GPS Handheld
- Mobile phone and smart phone
- GPS receiver and GPS mouse
- Personal positioning and navigation
Specification
| PHYSICAL CONSTRUCTION | |||
| Dimension | L24.0mm*W14.0mm*H13.0mm | ||
| Weight | <5 gram | ||
| Receiving frequency | 1575.42MHZ; C/A code | ||
| Mounting | 14-pin stamp holes | ||
| Construction | Full EMI shielding | ||
| ENVIRONMENTAL CONDITIONS | |||
| Temperature | Operating: -30 ~ + 85°C | ||
| Storage: -40 ~ + 85°C | |||
| COMMUNICATION | |||
| Protocol | NMEA0183 V3.00 | ||
| Signal level | UART @ 3.3V | ||
| INTERFACE CAPABILITY | |||
| Output Sentences | Standard | GGA, RMC, GSV, GSA, VTG | |
| Option | GLL, ZDA | ||
| PERFORMANCE | |||
| Sensitivity | Autonomous Tracking: - 160dBm | ||
| Receiver architecture | 20 parallel channels | ||
| Start-up time | Hot start | <5 sec. typical | |
| Warm start | 45 sec. typical | ||
| Cold start | 45sec. typical | ||
| Position accuracy(CEP50) | Autonomous Positional Error | <1.0 m | |
| Velocity | 100m/s (Maximum) | ||
| Altitude | 50 km (Maximum) | ||
| Update Rate Update Rate | 1 Hz | ||
| Power Supply | 3.3V +- 5% | ||
| Current Consumption | Acquisition: 53mA, Tracking: 53mA | ||
| Baud Rate | 9600 bps (default) & 4800/9600/38400/57600/115200 bps are adjustable | ||
This specification is subject to change without prior notice...
 |
 |
Application Diagram
(23678) 11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: +886-2-22694456 Fax: +886-2-2269-4451
E-mail: sanav@sanav.com
Design by Taiwan Products, B2BChinaSources, B2BManufactures
Tel: +886-2-22694456 Fax: +886-2-2269-4451
E-mail: sanav@sanav.com
Design by Taiwan Products, B2BChinaSources, B2BManufactures